Articles / HVAC & Refrigeration

Vapour-Compression Cycle: How Machines Move Heat

The core idea

Nothing actually makes cold. Heat is energy, and it flows spontaneously from hot to cold — never the reverse, any more than water flows uphill. A refrigerator or air conditioner is a heat pump: it spends mechanical work to carry heat against its natural direction, out of a cold space and into a warmer one.

The trick is that a fluid's boiling point depends on pressure. Drop the pressure and a fluid boils at a low temperature; squeeze it and it condenses at a high one. The machine exploits this with four components in a loop:

The energy books must balance: Q_hot = Q_cold + W — heat rejected outside equals heat removed inside plus compressor work W. Efficiency is the COP = Q_cold / W — kilowatts of heat moved per kilowatt of electricity. A COP of 3 means three units of heat moved per unit of work; no resistance heater can touch that, because resistance heat is capped at COP 1.

Real-world example

Your kitchen fridge and a home split A/C are the same machine with different geometry: the fridge's evaporator hides in the food compartment, its condenser is the warm grid on the back. A winter heat pump is also the same loop, run so the useful output is the hot side — and with a reversing valve it becomes an air conditioner in July. One cycle underlies most of the world's cooling and a growing share of its heating.

Common pitfall

Leaving the fridge door open to cool a hot kitchen. Every joule of heat removed from the room goes right back in through the condenser — plus the compressor's electrical work W. Net effect: the room gets warmer by W. You'd be running a 100-watt room heater with extra steps.

Frequently Asked Questions

Can a refrigerator cool a room with the door open?
No — it heats it. All the heat removed from the room is dumped straight back in by the condenser, plus the compressor's electrical input W. Net effect: the room gets warmer by exactly the compressor's power draw.
What are the four main components of the vapour-compression cycle?
Evaporator (absorbs heat on the cold side), compressor (raises pressure and condensing temperature), condenser (rejects heat on the hot side), and expansion valve (throttles the liquid back to low pressure).
What is COP in refrigeration?
The Coefficient of Performance: heat moved divided by electrical work input (COP = Q_cold/W). A COP of 3 means three units of heat moved per unit of electricity — resistance heating can never exceed COP 1.
Why does a refrigerant's boiling point matter?
Boiling point depends on pressure. Dropping the pressure lets the refrigerant boil and absorb heat at low temperature; compressing it raises the temperature at which it condenses and releases that heat outdoors.

Try our engineering calculators

Put the theory to work — run the numbers right in your browser.

Open the tools →
← Back to HVAC & Refrigeration